Why is my Leviton light switch not working?
To power cycle a switch (DW15S), you will need to flip the circuit breaker powering the switch off for 5 seconds, and then flip back on. In most cases this will address your situation. If the loss of control continues or if you have any questions, please contact support at [email protected].
How do you set up Leviton lights?
– Locate and open the Leviton “Decora Digital Dimmer & Timer” app on your smart device. – Select the “+” sign at the top right corner to add your Decora Digital device. – Follow the on-screen instructions to pair your smart device: – Hold the OFF button on your Decora Digital device until its status LED blinks.
How do you reset a Leviton light?
This procedure can also be used to place the accessory in ready mode with the locator LED flashing green: • Hold the top of the paddle for 7 seconds. – After 7 seconds the Locator LED will blink amber. Release the top of the paddle and the switch will reset. Once the switch has reset the Locator LED will blink green.
Why is my Leviton offline?
Simply press and hold the up paddle/button for 3 to 5 seconds and then release. This reboots the device and runs a diagnostic mode. Watch the LED at the bottom and take note of the color pattern that flashes after you release the button. After a minute, check your app to see if the device has come back online.
Why is there no power to my light switch?
If the light switch isn’t working at all, there may be no power to the circuit. Make sure the breaker to the switch is on in your breaker box and determine whether there are any other tripped outlets and switch them on as well. This is the simplest solution you’ll want to try first that may fix the issue.
How do you reset a Leviton breaker switch?
Choose Manage from the Leviton Load Center interface:
- Choose settings:
- Choose Factory Reset.
- Choose to reset a smart breaker or metering accessory:
- Turn each breaker you wish to reset to the off position.
- Press continue.
- After pressing Continue turn the breaker back on.
How do I get my Leviton back online?
How do you know if a light switch has power?
To test a non-contact voltage tester, hold the tool near an outlet you know has live power and make sure it senses the current. To test a continuity tester, attach the tester clip to the tester’s metal probe; the tester should light up.
Why are none of my lights working?
It’s a problem if you have a sudden loss of power in the house—such as the lights going out—and the circuit breaker for those appliances and outlets hasn’t tripped. The most common solution for losing the lights is a tripped breaker, and in most cases resetting the breaker is all you need to do.