What is the blue wire on a Harbor Breeze fan?

The blue wire on a ceiling fan is to control the power running to the light kit. The black wire is usually reserved for fan power only and does not extend over to your light kit. Without connecting the blue wire on your ceiling fan to a power source, you will not be able to control your lights.

What are the three wires on a ceiling fan?

Black wire is for the fan.

  • Blue wire is for the light, if light is included with the fan.
  • White wire is neutral.
  • Green wire is for the ground.
  • Red wire is sometimes included and acts as a conductor to carry power to the light kit.
  • Why does my ceiling fan have a red wire?

    A red wire up in the ceiling fan junction box usually indicates that the wiring has been installed which provides separate switch for the light and a separate switch for the fan motor. If your ceiling fan does not have a light fixture, then simply cap off the red wire and attach the fan motor to the black wire.

    Are blue and red wires the same?

    Red wires are hot wires common in a 240-volt outlet or when a wall switch controls the outlet. Blue and yellow wires are hot wires for ceiling fans and three- or four-way switches. White or gray electrical wires are neutral wires.

    What should I do with the red wire when installing a ceiling fan?

    Why is there an extra red wire?

    In a three-conductor cable, the extra wire is red, and it’s almost always used as a hot wire. When you see a red wire in a 120-volt duplex outlet box, it’s usually because one of the outlets is operated by a wall switch, while the other is always on. The red wire is for the light switch.

    What color wires go where on a furnace?

    This is the most typical thermostat wiring style, and it applies to systems that regulate both heat and air conditioning. The wires are typically arranged as follows: red for 24-volt hot, white for heat, yellow for cooling, green for the fan, and blue for common (although the common wire may be a different color).