What is Pace 5268AC Gateway?

The Pace 5268 is one of the gateways used for Fusion DSL and the primary gateway for Gigabit Fiber customers. It features four gigabit Ethernet LAN ports and a 4×4 MIMO 802.11AC wireless interface. Please note, a Pace 5268 is also provided for Fusion IP Broadband customers.

What does the service light mean on AT modem?

The power status lights on your Wi-Fi® gateway indicate: Green: The gateway is powered on. Flashing green: The gateway is starting. Amber: There’s a software update in progress.

How do I turn on wifi on pace 5268AC?

Setting up In-home Wi-Fi on your Pace 5268 gateway

1. Make sure your gateway and computer are connected by an Ethernet cable, and the connection is secure on both ends.
2. Click Wireless.
3. Choose or enter the following settings: 2.4 GHz wireless band. TIP: Need a visual? See our Wi-Fi example on a Pace 5268 gateway.
4. Click Save.

Is the AT 5268AC a modem or router?

AT U-verse Pace 5268AC Gateway Internet Wireless Modem Router with power adapter.

Is AT gateway a wireless router?

AT’s Wi-Fi Gateway is a modem-router combo device that not only brings the internet into your home, but also transmits the signal throughout your house for whole-home Wi-Fi. The wireless gateway allows you to connect up to four wired devices and any Wi-Fi enabled devices in your home.

How do I setup my pace router?

Setting up in-home Wi-Fi on your 2Wire or Pace gateway

1. Make sure your 2Wire or Pace gateway and computer are connected by an Ethernet cable, and the connection is secure on both ends.
2. Click Wireless.
3. Choose or enter the following settings: Item/field. Setting. Enable Wireless Interface. Default: Enabled.
4. Click Save.

How do I setup my new AT router?

Connect your Device (Basic Setup)

1. Connect the Ethernet cable from the internet port on your router to a yellow Ethernet port on the AT gateway.
2. Make sure your router is not on the same subnet as the AT gateway. This can lead to IP address conflicts. By default, the AT gateway is set to 192.168. x.

How do I change my AT Wi-Fi from 2.4 to 5GHz?

Go to Settings> LAN > Wi-Fi. Then, a little ways down the page, select Advanced Options. This opens up a new menu. Under both the 2.4 GHz radio and the 5 GHz radio sections, you can change the Wi-Fi channel from “Auto” to a specific number.

Can I replace AT modem with my own?

Can you use your own modem with AT? A: Yes, you can.

Can I replace my AT uverse router?

AT Internet requires the use of AT provided equipment. Others can recommend additions to the AT router but you cannot replace it.

Is my AT modem also a router?

How do I reset my pace router?

How to reset your Pace 4111N Wireless Gateway:

1. The reset button can be found on the back of your Wireless Gateway.
2. Press and hold the reset button for 3 seconds.
3. Wait until the lights restore to their normal configuration. (Power, Wireless, Broadband 1, and Service lights should all be green).

How do I connect my router to my ATT Uverse modem?

Connect your router Turn off your computer and DSL modem, then disconnect the Ethernet cable from your computer. Connect an Ethernet cable between the Ethernet port of your DSL modem and the WAN or Internet port on your router. Turn your DSL modem and router on. Turn your computer on.

Can I replace my AT modem with my own?

You can place a compatible modem BEHIND the AT router but you cannot replace the AT provided router.

Can I replace my ATT router with my own?

Part 1) Can I use my own router? Absolutely. I upgraded my UVerse service with an ASUS AC1900 router a few months back.

How many pages are in the manual for the Pace 5268AC?

Related Manuals for Pace 5268ac Gateway Pace 5031NV Datasheet Voice-enabled udsl gateway (2 pages) Gateway Pace 5168NV Technical Specifications

How many pages is the manual for the gateway pace 5168nv?

Related Manuals for Pace 5268ac Gateway Pace 5031NV Datasheet Voice-enabled udsl gateway (2 pages) Gateway Pace 5168NV Technical Specifications Triple play, bonded adsl2+/vdsl2 gateway (2 pages) Gateway Pace HomePortal 5168NV Manual

How many pages is the user manual for the pace 921vnx?

Gateway Pace 921VNX User Manual Wireless dsl voip gateway (36 pages) Gateway Pace i3822V Installation Manual Homeportal intelligent gateway (64 pages) Summary of Contents for Pace 5268ac

Is the pace logo a registered trademark of pace?

Pace and the Pace logo are registered trademarks of Pace plc. All other trademarks are the property of their respective owners. Pace provides no warranty with regard to this manual, the software, or other information contained herein, and hereby expressly… Page 3: Table Of Contents