How many square feet is the average staircase?

A standard staircase occupies 30-square-feet of space above and below the staircase. This is the most common dimension, given an 8-foot ceiling, where the staircase width measures 3-feet (36-inches) and horizontal floor space occupied measures between 9- to 10-feet.

How do you measure for hardwood flooring?

To do so, use a tape measure to determine the room’s length and width. Then multiply the length by the width to get your square footage. For instance, if the room is 12 feet wide and 12 feet long, you will need enough flooring for 144 square feet (12×12=144).

How do I calculate my step size?

Divide the number of feet in your measured distance by the number of steps you took from the first mark to the second. Distance in feet/number of steps = step length. For example, if it took you 16 steps to cover 20 feet, your step length would be 1.25 feet (15 inches).

How do you find the surface area of a staircase?

Measure the length and width of either the hole through which the stairs descend or the area covered by the bottom of the stairs. Multiply the length by the width to ascertain the square footage of rectangular areas. For a spiral staircase use the formula area = pi x radius squared, where pi is usually given as 3.1415.

How many cases of hardwood flooring do I need?

Using an example of 210 square feet in our room and closet, we can figure our allowance for 10% waste by multiplying 210 x 10% to get 21, so we will need to purchase 231 square feet of hardwood. If the product we selected has 20 square feet per carton, then divide 231 by 20.

How do you calculate square footage of stairs?

Measure the width of one stair to the nearest foot. Multiply this number by the rise and run feet measurement to obtain the area in square feet. This measurement can also be used when painting a staircase.

How much wood do I need for stairs?

Measure the distance from the base to the top of the riser. Multiply this number by the total number of risers you have to get the total stair height. Multiply the total stair height by the width to get the amount of flooring you will need for the risers.

How do you measure linear feet for stairs?

To measure straight stairs make sure to:

1. Measure both the tread (horizontal step) and the riser (vertical part of step).
2. Then count the number of steps.
3. Multiply the number of steps by the total inches per stair.
4. Then divide by 12 to get the total linear feet necessary for your straight stairs.

How do you measure floor for stairs?

Measure the width of one stair to the nearest foot. Multiply this number by the rise and run feet measurement to obtain the area in square feet.

How do you calculate volume for stairs?

1. To find the volume of the staircase use the equation volume=length x width x height. 2. Find the length, width, and height of the bottom or base step.

How do you calculate rise and tread on stairs?

From the above Diagram,

1. The staircase has divided into two flights providing a landing slab at mid of the staircase height.
2. So Number of Riser = Height of Staircase / Height of one Rise.
3. = 1500/150.
4. = 10 Nos.
5. So as per standard, we are providing 300 mm as tread length.
6. Number of Tread = Length of Stair/One number of Tread.

How do I calculate how much wood I need?

You can measure board feet by multiplying length x width x thickness in inches, and then dividing by 144. If ordering a large amount by board feet, just multiply the total board feet needed by the price per board foot for the total cost.

How do you calculate materials for stairs?

The Calculation The length has to be long enough for the stringer ) plus the lineal foot cost for this material. length of the board used for the treads ( length in decimal feet, the total length for cutting individual treads out of), plus the lineal foot cost for this material.

How do you measure for stairs and landing?

Measure from the top of the stairs to the bottom, as this is the way the pile direction will go. Measure the width and depth of the doorways of your landing and hallway and jot down this information on your plan. Make sure to measure any drop backs or alcoves on the landing and hallway.

How do you calculate cubic feet of stairs?

THINK IN RECTANGLES For instance, to measure stairs, break the individual stairs into rectangles and calculate the volume of each individual rectangle. The volume is determined by multiplying the length x width x depth. Once finished, add up the rectangle volumes to find the total volume.

How do you measure stairs for flooring?

You will need to calculate the dimensions of the stairs so you know how much flooring you’ll need. Place your tape measure on the ground in front of your bottom stair and measure the width of the stair. Write this measurement down on a piece of paper.

How do you measure a hardwood floor?

To obtain an accurate measurement, it is best that you measure your floor by the inch. This can be done by measuring from wall to wall and then multiplying those two distances.

How to install hardwood flooring on stairs?

How to Install Hardwood On Stairs. 1 Step One: Trim Planks to Size. Measure each part of each step of your stairs separately. There are four important measurements: the tread (the part 2 Step Two: Install Risers. 3 Step Three: Install Tread. 4 Step Four: Install Balustrade. 5 Step Five: Sand and Finish.

How do I check the depth of the treads on stairs?

Use the tape measure to check the depth of each tread, from front to back. Measure the height of each riser, from the bottom of the preceding step to the lip of the next higher up or vice versa.