How do you use the Iogear KVM switch?

Press and hold the remote switch button of the KVM while connecting the 2 USB connections of a set of KVM cable to the computer that you will use to perform the firmware upgrade. When you see the 2 LEDs are flashing on the KVM, you can now release the remote switch button.

How do I reset my Iogear KVM switch?

To reset the KVM, use a thin object to press this recessed switch in to initiate a warm reset. If the switch is kept in for longer than three seconds, a cold reset takes place. Lights to indicate that the KVM is receiving power. Connect the cables from your VGA monitor, and PS/2 keyboard and mouse to these ports.

What is a KVM DisplayPort?

DisplayPort KVM – Switch Between 2 DisplayPort Computers. Easily switch between your two DisplayPort computers and control them with one monitor, one keyboard and one mouse. IOGEAR’s 2-Port USB Cable DisplayPort KVM Switch comes ready with built-in cables and is USB powered.

What is KVM hotkey?

For an easy reset, simply push a button to switch all connections to the next KVM port in sequence. At that point, all prior settings are irrelevant and all point to the same client….Overview Of Hotkey Sequences.

Hotkey Switch KVM, USB hub, and audio to next port
[Scroll Lock] [Scroll Lock] [U] [Enter] Switch only audio signal to next port

Can you use dual monitors with a KVM switch?

【Dual Monitor KVM Switch HDMI 2 Port】: Consoles control up to 2 computers or laptops with 1 independent set of USB keyboard, mouse and monitor or 2 monitors extended or duplicated display with dual head input. The best KVM Switch to make your work space tidy and efficient, also a premium choice for working from home.

How do I power a KVM switch?

You can try to power cycle the KVM and this can be done by powering down the attached computers and unplugging the KVM cables from each computer. Once this done allow the KVM to sit for about five minutes and then plug the KVM cables back into each computer.

How do I connect a KVM switch to my computer?

How do I set up my KVM switch?

  1. Turn off all of the computers and monitors that will be connected to the KVM switch.
  2. Connect the power adapter to the KVM switch.
  3. Connect the video cables from your monitors to the console video port on the KVM switch.
  4. Turn on the monitors.

How do I setup dual monitors with a KVM switch?

Connect the power adapter to the KVM switch. Connect the DisplayPort cables from your monitors to the console DisplayPort ports on the KVM switch. If it is not already turned on, turn on the monitor. Connect your keyboard and mouse to the console PS/2 or USB ports on the KVM switch.

How can I connect 2 monitors to one computer?

Plug the power cords into your power strip. Connect the first monitor to your computer through the HDMI port or through a VGA port, if desired. Do the same for the second monitor. If your computer only has one HDMI port and one VGA port, which is common, find an adapter to complete the connection.

Does KVM switch need power?

7: Electrical power KVM switches with their own power supply work more consistently, in my experience, than do those that draw their electrical supply from the systems they connect to. Even many budget-priced KVM switches include optional power supply connections but don’t ship with a standalone power adapter.

What is hotkey switching?

You can switch among clients by pushing buttons on the switchbox itself, or by entering hotkey sequences at the console keyboard. Striking the Scroll Lock key twice gets the KVM’s attention, and additional keys allow individual client ports to be managed and selected directly.

How do I use 2 monitors with 2 computers?

Most monitors have multiple input ports in the back. You can connect both computers to your monitor at the same time using different cables. Then, using the monitor’s input selection, via the control buttons on the back or side (or remote control if it has one), you can choose which computer’s output you see.

What is the easiest way to switch between computers on one monitor?

The most common ways to run multiple computers via one monitor is: Use a cable to connect the computers to the HDMI or DisplayPort on your monitor. Use a keyboard, video, and mouse (KVM) switch device to connect your computers, monitor, keyboard, and mouse. Then flip a switch to swap between computers.

How do I toggle between laptop and monitor?

Another way to switch between these modes is to look for a function key on the top row of keys on your laptop which shows two monitors. Press the Fn key and that function key and it should toggle through the various configurations: laptop display only, laptop + external screen, external screen only.

How do you power cycle a KVM?

How do I contact IOGEAR support?

IOGEAR www.iogear.com iogear.custhelp.com [email protected]ear.com Contact © 2018 IOGEAR® Created Date 6/12/2018 11:24:43 AM

What is IOGEAR’s warranty policy?

IOGEAR makes no warranty of any kind with regards to the information presented in this document. All information furnished here is for informational purposes only and is subject to change without notice. IOGEAR assumes no responsibility for any inaccuracies or errors that may appear in this document.

Does the gcs2hu support HDMI?

2-Port Cable KVM Switch with HDMI Support GCS2HU/GCS62HU PART NO. M1130-a User Manual www.iogear.com © 2018 IOGEAR®Part No. M1130

What is the IOGEAR KVM?

Loading… IOGEAR’s 2-Port USB VGA Cable KVM allows users to share a VGA monitor, a USB mouse, and a USB keyboard between two computers. It is the ideal competitively priced – entry level KVM solution that allow users to multitask with ease.