How do I fix my Sony Blu-Ray player?
Follow these steps to resolve playback issues.
- On your device, press and hold the Power button for ten seconds or more to turn it off.
- Unplug the AC power cord from the wall outlet, and then plug it back in.
- Turn on the device.
- Press the Eject button and remove the disc.
- Set BD-ROM 24P Output to Off.
How do I reset my Sony 4k Blu-Ray player?
Make sure the player is turned on. On the front of the player, press and hold the CONNECT and EJECT buttons at the same time until the EJECT button continuously blinks an amber light. When the amber light begins to blink on the EJECT button, release both buttons. NOTE: The player will turn off and restart.
Why won’t my Sony Blu-Ray player play sound?
This issue could be caused by the volume level of the connected TV or sound system being too low or muted. It also can occur if the audio output setting of the Blu-ray Disc player is not set properly.
Why does my Blu-Ray movie have no sound?
The HDMI cable may be defective. Try a different one. Set the Audio (HDMI) or Digital Audio Output setting on the Blu-ray Disc player to PCM. This applies if you connected an amplifier to the Blu-ray Disc player and the TV with an HDMI cable.
Can you use Sony Blu-Ray player without remote?
Use the physical buttons on your Sony Blu-ray player Typical buttons include Play/Pause, Power on/off, Eject, Skip Track and Stop. If it’s got a Play/Pause button on it, you can use it to start playing the disc.
How do I get sound from my DVD player to my TV?
Connect your Blu-ray player to your TV using an HDMI cable. This will transmit both the video and the audio to your TV with one cable. Connect the AUDIO OUT ports on your DVD player to the AUDIO IN ports on your TV with standard audio cables (red and white jacks).
How do I unmute my DVD player?
It could be possible that the audio on your DVD player is entirely muted. To ensure that the audio is not muted, go to your DVD settings to check. Alternatively, you can also press the mute button on the remote to unmute the audio.
Why is my DVD playing but no sound?
Adjust the volume settings on your DVD player. Check the volume settings on your Sony, Samsung or other brand of DVD player and see if the mute mode is activated. If it is, change it to the normal mode and see if DVD player no sound problem is fixed or not.