How do I fix error 59 F0?
Usually, for 59. F0, it is recommended to try resetting the toner and the fuser assembly. Reset the printer using the power switch, turn off the printer for a few minutes. Turn on the printer and wait for the HP colour jet printer to revitalise.
How do I fix a fuser error on my HP printer?
Solution one: Reset the printer
- Press the Power button to turn off the printer.
- Disconnect the power cord from the rear of the printer.
- Wait 30 seconds, and then reconnect the power cord.
- Press the Power button to turn on the printer. Wait for the product to start.
- Try printing again.
What is 59 F0 error on HP printer?
Description: This error is primarily caused by a transfer alienation failure in which the ITB is stuck and unable to rotate, the SR9 sensor (the primary transfer roller disengagement sensor) has gone bad or the fuser drive assembly has failed.
How do I fix error 59 F0 on HP CP5225?
Run the primary transfer roller engagement and disengagement drive test in the actuator drive mode to verify that the primary transfer roller disengagement mechanism is functioning correctly. If it is not functioning correctly, replace the fuser drive unit.
How do you clear a paper jam with a fuser?
Use the following procedure to check for paper in all possible jam locations in the fuser area….Clear paper jams in the fuser
- Press the front-door-release button.
- Open the front door.
- Remove the toner cartridge.
- Lift the jam-access cover.
- Remove any jammed paper.
What is 59 f0 error on HP printer?
What is ITB printer?
HP Color LaserJet CP5225 and CP5525 Printer Series – Preparing Intermediate Transfer Belt (ITB) for Shipping. At times, it is necessary to ship an Intermediate Transfer Belt (ITB) that has been used in a printer for a period of time.
How to fix hp 4250 LaserJet printer error code 5940?
HP 4250 LaserJet Printer displays 59.40 error. It may ask for repeated restarts. The toner cart is jammed. Pressing the green GO button. Pull out the toner cartridge and peel back the guard over the green drum. Rotate the green drum to free it. Put toner back and test printing. Last resort, replace the printer cartridge.
What does HP printer error 59 F0 mean?
The HP printer error 59.F0 may be caused due to the failure in transfer alienation. Transfer alienation is a situation in which the Intermediate Transfer Belt (ITB) gets stuck and does not fully rotate. Another possible reason for the error 59.F0 in the HP printer can be a problem with the SR9 sensor.
What does a 59 error code on a Kenmore dryer mean?
06-06-2020 02:38 PM A 59 error is a motor issue of some sort. Could be as simple as a bad cartridge causing the drum motor to lock up. If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.