Are all Chevy distributors the same?

ALL Chevy V8 distributors are interchangeable. On a mechanical distributor, the centrifugal and vacuum advances may not be appropriate, and the drive gears can change based on the camshaft material.

Are small block and big block distributors the same?

They are both the same. My bigblock distributor came from my son’s small block. Thanks for the fast reply.

Are all Chevy 350 distributors the same?

The only differences between any of the distributors, whether it’s a 350-horse Vette or a Caprice Station Wagon unit, are the following parameters: Length of the mechanical advance curve.

Is there a difference between a small-block and big-block distributor?

Distributors are interchangeable but the advance curves are tailored to different applications. But they will fit both the small blocks and the big blocks. Some early BB distributors had an oiling groove but other than that it is the timing curve differences and different vacuum advances.

Can a distributor make your car faster?

Professional engine builders agree there’s a huge advantage in upgrading an older car with a points-type distributor to one with an electronic setup. Ask one, and they’ll tell you it really wakes an engine up, helps achieve better mileage, and allows smoother running at all rpms.

Will a new distributor improve performance?

If you get a high quality distributor made for your vehicle, you’ll notice a big improvement in your engine’s performance. Your engine will run smoother and produce more power at all RPMs.

Will a small-block Chevy distributor work in a big block?

The high-quality distributors in this group are interchangeable with Small-Block Chevrolet V-8 components. Chevrolet Performance distributors cannot be used with Tall-Deck Bowtie blocks, except adjustable distributor P/N 10093387.

What is the best timing for Chevy 350?

The timing can vary between 2 and 12 degrees BTDC, the recommended spark plugs are different and even the plug gaps vary. In most cases starting out with 12 degrees of initial advance is about right.

What does HEI stand for on a distributor?

high-energy ignition
Way back in 1975, General Motors, through its Delco Electronics Division, rethought how an ignition coil was controlled with the advent of its high-energy ignition (HEI) system. Subsequently, almost every modern electronic ignition system has roots traced to that GM design.

What’s the difference between a 350 small block and a 350 big block?

Big block engines are larger in size and weigh more, but they produce more consistent power and torque to overcome the weight. Small block engines are smaller for better acceleration and handling, but more recently built models can be just as powerful as big block engines.

Can you replace distributor with electronic ignition?

When converting from points to electronic ignition, you’ve got two options. You can either convert your existing distributor, or you can install a new distributor. Advance Auto Parts offers kits that allow you to remove the old points components from inside your distributor and replace them with new ones.

What is the firing order for Chevy 350?

Engine with Single Cylinder Arrangement. The simplest engine of all is the single-cylinder arrangement which produces a power stroke every 720 degrees.

  • Two-Stroke Engine. There are Chevy owners that expand their cylinders to a two-stroke engine.
  • Horizontally Counter-rotating Engines.
  • What is standard transmission for 350 Chevy?

    Transmissions come in two basic types, Automatic and Manual: Automatic TH350. Best transmission choice, hands down. The Turbo Hydra-matic 350 was first used in 1969 model cars. It was developed jointly by Buick and Chevrolet to replace the two-speed Super Turbine 300 and aluminum case Powerglide transmissions.

    What is the first year for 350 Chevy with EFI?

    The small block Chevrolet engine was introduced in the fall of 1954 for the 1955 model year displacing 265 cubic inches. The 350 was introduced for 1967 originally as a performance engine. 5 people found this helpful.

    Where is the starter on a Chevy 350?

    The high torque starter (right) has a spacer connecting the solenoid to the metal strap going into the motor. When using a block-mounted starter, it wise to use the special, knurled starter bolts to correctly position the starter. Using incorrect starter bolts is a leading cause of noisy starters.